36 Drying of Wood

patten N 1265, Instituto nacional de proteçãoindustrial, Brazil.Aléon, D., Chanrion, P., Négrié, G., and Perré, P., 2003.FormaXylos 4—Le séchage (Training in Wood Science:Drying, Vol. 4), CD-Rom français/English,CTBA, Paris.Antti, A.L., 1992. Microwave drying of hardwood: simultaneousmeasurements of pressure temperature andweight reduction, Forest Prod. J., 42(6): 49–54.Ashworth, J.C., 1977. The mathematical simulation ofbatch-drying of softwood timber, Ph.D. thesis, Universityof Canterbury, New Zealand.Ashworth, J.C. and Keey, R.B., 1979. The kiln seasoning ofsoftwood boards, Chem. Eng., 347(8): 593–598, 607.Audebert, P. and Temmar, A., 1997. Vacuum drying ofoakwood: moisture strains and drying process, DryingTechnol., 15: 2281–2302.Banks, W.B., 1968. A technique for measuring the lateralpermeability of wood, J. Inst. Wood Sci., 4(2): 35–41.Behnke, C. and Militzer, K.-E., 1996. Vacuum dryer model,Proceedings of the Fifth International Wood DryingConference, Québec, Canada, pp. 139–145.Bolton, A.J. and Petty, J.A., 1978. The relationship betweenthe axial permeability of wood to dry air and to a nonpolar solvent, Wood Sci. Technol., 12: 111–126.Booker, R.E., 1994. Collapse or internal checking, whichcomes first? Proceedings of the 4th IUFRO WoodDrying Conference, 133–140, Rotorua, New Zealand.Booker, R.E., 1996. New theories for liquid water flow inwood, Proceedings of the 5th IUFRO Wood DryingConference, 437–445, Québec, Canada.Boone, R.S., Kozlik, C.J., Bois, P.J., and Wegert, E.M.,1988. Dry kiln schedules for commercialwoods temperate and tropical, USDA FS ForestProducts Laboratory, General Technical ReportFRL-GTR-57.Bosshard, H.H., 1984. Holzkunde, Band 2, Zur Biologie,Physik und Chemie des Holzes (Wood Science: Biology,Physics and Chemistry of Wood, Vol. 2), BirkhäuserVerlag, Basel.Brandaõ, A. and Perré, P., 1996. The ‘‘flying wood’’: aquick test to characterise the drying behaviour oftropical woods, Proceedings of the Fifth InternationalIUFRO Wood Drying Conference, Québec, Canada,pp. 315–324.Carlquist, S., 2001. Comparative Wood Anatomy, Springer,Berlin.Chen, G., Keey, R.B., and Walker, J.C.F., 1997a. Thedrying stress and check development on hightemperaturekiln seasoning of sapwood Pinusradiata boards, Holz Roh-Werks., 55: 59–64.Chen, G., Keey, R.B., and Walker, J.C.F., 1997b. Stressrelief for sapwood Pinus radiata boards by coolingand steam-conditioning processes, Holz als Roh-Werks., 55: 351–360.Chen, P.Y.S., Helmer, W.A., and Rosen, H.N., 1982. Experimentalsolar-dehumidifier kiln for drying lumber,Forest Prod. J., 32(9): 35–41.Chen, P.Y.S., Zhang G., van Sambeek J.W., 1998. Relationshipsamong growth rate, vessel lumen area,and wood permeability for three central hardwoodspecies, Forest Products Journal, 48:87–90.Choong, E.T. and Kimbler, O.K., 1971. A technique ofmeasuring water flow in woods of low permeability,Wood Sci., 4(1): 32–36.Choong, E.T. and Tesoro, F.O., 1989. Relationship of capillarypressure and water saturation in wood,Wood Sci. Technol., 23: 139–150.Choong, E.T., Tesoro, F.O., and Manwiller, F.G., 1974.Permeability of twenty-two small diameter hardwoodsgrowing on southern pine sites, WoodFiber, 6(1): 91–101.Cloutier, A. and Fortin, Y., 1991. Moisture content–water potential relationship of wood from saturatedto dry conditions, Wood Sci. Technol., 25:263–280.Clair, B., 2001. Etude des propriétésmécaniques et du retraitau séchage du bois à l’échelle de la paroi cellulaire:essai de compréhension du comportement macroscopiqueparadoxal du bois de tension à couche gélatineuse,PhD dissertation, ENGREF, Montpellier.Comstock, G.L., 1967. Longitudinal permeability of woodto gases and nonswelling liquids, Forest Prod. J.,17(10): 41–46.Comstock, G.L., 1970. Directional permeability of softwoods,Wood Fiber, 1: 283–289.Comstock, G.L. and Côté, W.E., 1968. Factors affectingpermeability and pit aspiration in coniferous sapwood,Wood Sci. Technol., 2: 279–291.Cown, D.J., 1992. New Zealand radiata pine and Douglasfirsuitability for processing, FRI Bull., 168,NZFRI, Rotorua.Cown, D.J. and McConchie, D.L., 1983. Studies on theintrinsic properties of new-crop radiata pine II:wood characteristics of 10 trees from a 24-year-oldstand grown in the Central North Island, FRI Bull.,37, NZFRI, Rotorua.Culpepper, L., 1990. High temperature drying-enhancingkiln operations, Miller Freeman, San Francisco, CA.Dahlblom O., Petersson H. and Ormarsson S., 1994.Numerical simulation of the development of deformationand stress in wood during drying, proceedingsof the 4th IUFRO Wood DryingSymposium, 165–180, Rotorua, New Zealand.Dahlblom O., Ormarsson S. and Petersson H., 1996. Simulationof wood deformation processes in drying andother environmental loading, Annals of Forest Science,53: 857–866.Davis, C.P., 2001. Drying Pinus radiata boards in dehumidifierconditions, Ph.D. thesis, Otago University,New Zealand.Davis, C.P., Carrington, C.G., and Sun, Z.F., 2001. Dryingrate curves for the dehumidifier drying of Pinusradiata boards, Proceedings of the Seventh InternationalIUFRO Wood Drying Conference, Tsukuba,Japan, pp. 216–221.Davis, C.P., Carrington, C.G., and Sun, Z.F., 2002. Theinfluence of compression wood on the drying curvesof Pinus radiata in dehumidifier conditions, DryingTechnol., 20: 2005–2026.ß 2006 by Taylor & Francis Group, LLC.