Power Spot 250 User Manual (pdf) - Elation Professional

Power Spot 2509. Maintenance and Cleaning the POWER SPOT 250It is absolutely essential that the fixture is kept clean and dust, dirt and smoke-fluidresidues do not built-up on the surface or within the fixture. Otherwise the fixture's lightoutput could be significantly reduced. Regular cleaning will not only ensure the maximumlight output, but will also allow the fixture to function reliable throughout its life.A soft lint-free cloth moistened with any good glass cleaning fluid is recommended,under no circumstances should alcohol or solvents be used!The inside optical system should be maintained only by authorized persons. Pleasecontact Elation professionals for recommendation associated with internal cleaningprocedures.9.1 Safety Regulations• Always disconnect main power before attempting any service related issues!• Allow ample time for the lamp to cool (at least 20 minutes) before performing anycleaning procedures.• Never attempt operation with any of the protective covers removed!9.2 Cleaning Frequency (rule-of-thumb)The contamination of the fixture depends on the environment details. Therefore nogeneral guidelines can be given. From this it follows that the intervals are onlysuggestions from our practice experience.Position Interval In this wayOutside optic Weekly Soft cloth and glass cleanerColor filter Monthly Soft cloth and glass cleanerGobos Yearly Vacuum cleaner, airbrush, etc.Glass gobos Monthly Soft cloth and glass cleanerPrism Monthly Soft cloth and glass cleanerDimmer/Shutter Yearly Vacuum cleaner, airbrush, etc.Inside lens Monthly Soft cloth no glass cleanerFan and air channel Monthly Vacuum cleaner, airbrush, etc.ReflectorNeverLampNeverMoveable parts Yearly Suitable LubricantThe above chart is a recommended cleaning schedule only. Cleaning frequency©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com - Page 39