Certain Electric Power Tools, Battery Cartridges, and ... - USITC

(Unopposed CPF PR 55 (14-1711, are almost identical in design and color tothe Makita chargers.(a, CPX 202, p. 137028 -- compare with CPX 185 and211). I find, therefore, that these chargers would infringe the allegeddesign, color, design/color and special feature marks of complainants, ifsuch marks had been established.16. Infrinnement bv ResDondepts -450. Respondent Jepson -- If complainants held valid comon lawtrademarks as claimed, the following products of this respondent wouldinfringe one or more of such marks:Cordless drills with removable batterypacks, Model Nos. 2416 and 2410: 3/8" corded drills, Model Nos. 1210 and2200; finishing (palm) sanders, Model No. 6245: 4" disc grinder, Model No.4204N; 7" and 9" angle grinders, Model Nos. 4207, 4215, 4207LB and 4209L:Router, Model No. 7112; 7 1/4" circular saw, Model No. 8218; 10" miter saw,Model No, 92105. 14" cut-off saw, Model No. 9114: 7.2V and 9.6V batterycartridges, Model Nos. 7200 and 9600. (FF 361, 377, 382, 389, 407, 413,417, 422, 429, 435). Each of these products is manufactured in Taiwan by( C (FF 249). ( C sold the Jepson lineof power tools. (FF 480-81)451. Respondent Tochiado -- The following products of this respondentwould infringe one or more of the claimed marks:Cordless drills withremovable battery pack, Model Nos. 9610, 9610V, 7210, 7210s; cordless drillwith non-removable battery pack, Model No.7210A; cordless sanders,Workshop 07301; cordless jigsaws, Hodel No. 7223 and 07302; 7.2V and 9.6Vbattery cartridges, Model Nos. BC-6 and BC-8; 7.2V and 9.6V batterychargers, Model Nos. FC-6 and FC-8. (FF 362, 373, 399, 402, 403, 435,443).13 1