Hydraulic cylinder Tie Rod Design - imperial - Duncan Rogers

LUG MOUNTINGSSide Lug Mount – Style SL( N F PA style MS2)Centre Line Lug Mount – Style CL( N F PA style MS3)End Lug Mount – Style ELAvailable 1 1 /8" Through 8" Bore Only( N F PA style MS7)DWG. ADWG. BImportant NoticeThere is a construction variance in 1 1 /8" ,1 1 /2", 2" and 2 1 /2" bore sizes and in the3 1 /4" bore with a 2" diameter rod. Theround retainer shown above is not usedon these sizes. A square retainer, the samesquare size as the head, is employed. Inthe SL and CL Mounts, the retainer is heldin place with retainer screws that threadinto the head. The rod gland can beremoved without loosening the tie rods inall bore sizes. See Dwg. A.The EL Mount also employs a squareretainer in these sizes. The bottom two tierods thread into the lug and the top twotie rods have tie rod nuts. This assemblymethod is used on all bore sizes. The rodgland cannot be removed withoutloosening the tie rods in any bore size.See adjacent Dwg. B for details on 1 1 /8" ,1 1 /2" and 2 1 /2" bore sizes and in the 3 1 /4"bore with a 2" diameter rod.For Mounting styles SL and EL see note onpage 15 concerning Thrust key.24