GEA CAIRfricostar - CS Klimateknik

Transportation and StorageGEA CAIRfricostar4.2.2 Lifting the unit – transport device on base frame (for delivery units weighing up to 4000 kg)PERSONAL INJURY!Use only the transport devices provided by GEA! Make sure that these arefirmly seated before lifting the equipment.Fig. 4-2:max. 60°Transport devices for delivery units weighingup to 4000kg• The units may only be lifted using the transport devicesattached to the base frame.• Use the hoisting device (not included in scope of GEAdelivery) as shown.• Use the supplied timber spacers to provide protection atthe edges.• The suspension angle may not exceed 60°.• To make sure that the load does not slip or tilt, payattention to its centre of gravity when lifting it.• Transport devices may only be used once.• They may not be used to suspend the unit on apermanent basis.• No other loads may be lifted together with the deliveryunit.• When installing units outdoors, particular care shouldbetaken to ensure that the roof sheeting is not damagedby the hoisting devices.4.2.3Transportation with pallet truck or forklift truck• Always use the unit base frame or the supplied pallet as the supporting surfaceduring transportation.• Units must not be lifted without the base frame unless the unit profiles aresufficiently protected.• When transporting the unit using a forklift, both base frame profiles must be restingon the forks.• The centre of gravity and load distribution must be taken into account.DAMAGE TO THE UNIT!Never stack units on top of one another for transportation.Always transport units separately.The stacking of units and other components that are not part of the unit is notpermitted.Such stacking is only allowed when the necessary load-bearing capacity hasbeen specially incorporated into the units which are only delivered by the GEAfactories.20 PR-2006-0019-GB • Subject to modifications • Status 05/2009