GEA CAIRfricostar - CS Klimateknik

More documents

Recommendations

Info

AssemblyGEA CAIRfricostarFig. 5-4:Foundation with GEA roof frameFig. 5-5: Foundation on concrete base Fig. 5-6: Foundation on steel beam providedon-siteFig. 5-7:Foundation on steel support provided on-siteNOTE!Particular care must be taken to ensure compliance with the precise dimensions ofroof bushings and to ensure that the foundation is level!24 PR-2006-0019-GB • Subject to modifications • Status 05/2009
GEA CAIRfricostarAssembly5.1.5 Structure-borne sound attenuationIn order to reduce the transfer of vibrations from the unit to the supporting structure, itis necessary to install anti-vibration mounts and structure-borne sound attenuatingmats:– We recommend that the foundation is insulated from the unit using rubber plates,for example, where the unit is installed on level ground and no specialstructure-borne sound insulation requirements exist.– For very special acoustic requirements please consult an acoustics engineer to selectthe most suitable structure-borne sound attenuation solution.5.2 Assembling the unitNOTE!For detailed information, please refer to the documentation enclosed with the unit.Data sheet, installation instructions, small parts and accessories supplied loose canbe found in the supplied parts list.DAMAGE TO THE UNIT!Fittings/attachments etc. not provided by the manufacturer that could cause a leakmust not be mounted on the walls or frame of the unit. The unit’s serviceability mustbe maintained.Required tools: – Electric screwdriver, drill– Holder for bits/sockets– Sockets, sizes 8, 10– Slotted head screw bits, sizes 2, 3– Open-ended spanners sizes 8, 13, 17– Screw drivers 4.5-6.5– Hexagon socket size 6– Tensioning belts or suitable hoisting device5.2.1 Removing transportation lugs/safety devices• All yellow marked transportation lugs/safety devices on and in the unit must beremoved prior to assembly.• Remove the transportation safety devices on the fan.• The transportation lugs on the roof must be removed.Slacken the screws on the end walls. The lug can beremoved through the opening.• The screw can then be completely tightened again.• Remove the lug, screw and sleeve at the break point.• Screw in the M8 x 30 screw supplied (see Fig. 5-8).Fig. 5-8:Transport lugs – roof, end wall and break pointPR-2006-0019-GB • Subject to modifications • Status 05/2009 25
Page 1 and 2: Air conditioning of swimming pools
Page 3: GEA CAIRfricostarTable of ContentsC
Page 6 and 7: Safety and User InformationGEA CAIR
Page 12 and 13: Technical DescriptionGEA CAIRfricos
Page 18 and 19: Transportation and StorageGEA CAIRf
Page 20 and 21: Transportation and StorageGEA CAIRf
Page 22 and 23: AssemblyGEA CAIRfricostar5 Assembly
Page 26 and 27: AssemblyGEA CAIRfricostar• Remove
Page 28 and 29: AssemblyGEA CAIRfricostarAdditional
Page 30 and 31: AssemblyGEA CAIRfricostar5.2.4 Asse
Page 32 and 33: InstallationGEA CAIRfricostarNoteTh
Page 34 and 35: InstallationGEA CAIRfricostar6.3.3
Page 36 and 37: InstallationGEA CAIRfricostar6.3.4
Page 38 and 39: Electrical ConnectionGEA CAIRfricos
Page 44 and 45: CommissioningGEA CAIRfricostar8 Com
Page 46 and 47: CommissioningGEA CAIRfricostar8.4 D
Page 48 and 49: CommissioningGEA CAIRfricostarELECT
Page 50 and 51: MaintenanceGEA CAIRfricostar9 Maint
Page 52 and 53: MaintenanceGEA CAIRfricostar9.1.1 B
Page 54 and 55: MaintenanceGEA CAIRfricostarUnit co
Page 56 and 57: MaintenanceGEA CAIRfricostarInitial
Page 58 and 59: MaintenanceGEA CAIRfricostar• Obs
Page 60 and 61: MaintenanceGEA CAIRfricostar9.6 Hea
Page 62 and 63: MaintenanceGEA CAIRfricostarOil and
Page 64 and 65: TroubleshootingGEA CAIRfricostar11
Page 66 and 67: GEA CAIRfricostarMaintenance interv
Page 68: Customer proximity, sales structure

GEA CAIRfricostar - CS Klimateknik

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?