GEA CAIRfricostar - CS Klimateknik

More documents

Recommendations

Info

AssemblyGEA CAIRfricostarAdditional connection for double deck/side by side units• Connect both unit parts at the pre-drilled positions using provided plates.Fig. 5-16: Connectingunit partsParticulars for hygiene units• Clean and seal all internal break point grooves.The sealant is included in the scope of delivery for hygiene units.Fig. 5-17: Break point grooveParticulars for units for outside installationDAMAGE TO THE UNIT!Defective sealing provided on site may result in the ingress of water and subsequentdamage! Seal all parts carefully.Assembly of roofcomponents supplied looseThe roof sheeting above the break point is supplied loose with separated units.• Remove protective film prior to installation.• Install the roof sheeting on site.• The roof sheeting is joined together using clamping strips and supplied metricscrews (M6x16, plastic washers and nuts on both sides)orwith roof hat channel profiles using self-drilling screws (6.3 x 25 with sealingwasher). The joints formed during the above process must be sealed using thesupplied transparent sealing material.Fig. 5-18: Roof sheet28 PR-2006-0019-GB • Subject to modifications • Status 05/2009
GEA CAIRfricostarAssemblyThe roof end-sheet is supplied loose with units which are transported via roof usingtransportation lugs.• Remove transportation lugs.• Install the roof sheeting on site.• The same connections and sealing method for the breakpoint are also applied here.Fig. 5-19: Roof end-sheet with sealing points5.2.3 Assembling base frame cover (supplied loose)DAMAGE TO THE UNIT!Defective sealing may result in the ingress of water and subsequent damage! Sealall parts carefully.As an option, covers that conceal the base frame can be supplied loose. Correspondingretaining plates are pre-installed with this option.• Remove protective film prior to installation.• The covers are numbered and must be inserted in thecorresponding locations (also numbered) and screwed onusing self-drilling screws (6.3 x 25 with sealing washer).• Connecting plates and corners are provided to cover jointsand corners formed during the above process. Apply sealantbefore screwing these parts using self-drilling screws(6.3 x 25 with sealing washer).• Affix the supplied self-adhesive rubber sleeve before mountingthe siphon (supplied loose).Fig. 5-20: Base frame - covers• Seal the joint between base frame and unit frame.Fig. 5-21: SealingPR-2006-0019-GB • Subject to modifications • Status 05/2009 29
Page 1 and 2: Air conditioning of swimming pools
Page 3: GEA CAIRfricostarTable of ContentsC
Page 6 and 7: Safety and User InformationGEA CAIR
Page 12 and 13: Technical DescriptionGEA CAIRfricos
Page 18 and 19: Transportation and StorageGEA CAIRf
Page 20 and 21: Transportation and StorageGEA CAIRf
Page 22 and 23: AssemblyGEA CAIRfricostar5 Assembly
Page 24 and 25: AssemblyGEA CAIRfricostarFig. 5-4:F
Page 26 and 27: AssemblyGEA CAIRfricostar• Remove
Page 30 and 31: AssemblyGEA CAIRfricostar5.2.4 Asse
Page 32 and 33: InstallationGEA CAIRfricostarNoteTh
Page 34 and 35: InstallationGEA CAIRfricostar6.3.3
Page 36 and 37: InstallationGEA CAIRfricostar6.3.4
Page 38 and 39: Electrical ConnectionGEA CAIRfricos
Page 44 and 45: CommissioningGEA CAIRfricostar8 Com
Page 46 and 47: CommissioningGEA CAIRfricostar8.4 D
Page 48 and 49: CommissioningGEA CAIRfricostarELECT
Page 50 and 51: MaintenanceGEA CAIRfricostar9 Maint
Page 52 and 53: MaintenanceGEA CAIRfricostar9.1.1 B
Page 54 and 55: MaintenanceGEA CAIRfricostarUnit co
Page 56 and 57: MaintenanceGEA CAIRfricostarInitial
Page 58 and 59: MaintenanceGEA CAIRfricostar• Obs
Page 60 and 61: MaintenanceGEA CAIRfricostar9.6 Hea
Page 62 and 63: MaintenanceGEA CAIRfricostarOil and
Page 64 and 65: TroubleshootingGEA CAIRfricostar11
Page 66 and 67: GEA CAIRfricostarMaintenance interv
Page 68: Customer proximity, sales structure

GEA CAIRfricostar - CS Klimateknik

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?