GEA CAIRfricostar - CS Klimateknik

InstallationGEA CAIRfricostar6.3.3 Installing pool water condenser (optional accessory)DAMAGE TO THE UNIT!The water side flow rate in the pool water condenser may not be too high. Pleasepay attention to technical data during planning and design stage. If the water flowrate is too high, it may permanently damage the pool water condenser and in sucha way will render any warranty as null and void!The drain connectors of the pool water condenser are positioned directly at the poolwater condenser.• Install an air vent device at pool water outlet on-site.• Install connecting pipes in such a way that a trouble-free access to sections andcomponents on service panels is provided.Examples for hydraulic connection of pool water condenserExample 1DAMAGE TO THE UNIT!Pool water condenser lines must be resistant to heat (at least +80 °C) and deformation.Use appropriate materials.4213Fig. 6-3: Pool water condenser as a separate cycle1: Pump 2: Filter3: Pool water condenser 4: Temperature sensorExample 24213Fig. 6-4:Separate pool water condenser via splash water receiver.1: Pump 2: Filter3: Pool water condenser 4: Temperature sensor34 PR-2006-0019-GB • Subject to modifications • Status 05/2009