GEA CAIRfricostar - CS Klimateknik

GEA CAIRfricostar4.3 StorageTransportation and StorageNOTE!Observe the permissible storage conditions when storing the unit. Remove theoriginal packaging only before the installation starts.Protect the unit before commissioning against dust and dirt built up as well asdamage.Prior to commissioning, suitable measures must be taken to protect deliveredunits without packaging against dust and dirt built-up. Care must be taken toensure that condensation can not form below packaging supplied by others (byensuring the correct distance between the packaging and the casing).• Always place units on an even surface during long-term storage or intermediatestorage.• Protect units from bumps and knocks which may damage the casing and projectingcomponents.• If commissioning is not carried out within three months after the delivery, the beltdrive must be slackened.• Turn the motor axle and fan through at least 2 revolutions every 3 months.Permitted storage conditions / air conditions for non-installed units.Air temperature 5 °C up to 50 °CAir humidity Store units in a dry, non-condensing environmentPR-2006-0019-GB • Subject to modifications • Status 05/2009 21