12.07.2015 Views

Integrator's Reference Manual for Polycom HDX ... - 1 PC Network Inc

Integrator's Reference Manual for Polycom HDX ... - 1 PC Network Inc

Integrator's Reference Manual for Polycom HDX ... - 1 PC Network Inc

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

System CommandsdtrSets or gets the configuration of the DTR serial interface control signal (dataterminal ready). This command is only applicable if you have a V.35 networkinterface connected to your system.Syntaxdtr ParametergetDescriptionReturns the current setting.normal Sets the signal to normal (high voltage is logic 1).inverted Sets the signal to inverted (low voltage is logic 1).onSets constant high voltage. If this option is selected,inverted is not an option.Feedback Examples• dtr normal• dtr invertedCommentsThe default setting <strong>for</strong> the signal is “normal”.4 - 71

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!