Integrator's Reference Manual for Polycom HDX ... - 1 PC Network Inc

Using the API3. Power on the computer and the Polycom HDX system.4. From the computer, start a serial session using HyperTerminal or anotherappropriate utility.Using the API with a LAN ConnectionIf you have a computer connected to the LAN, you can send API commandsto the Polycom HDX system via Telnet port 24.1. On the computer, open a command line interface.2. Start a Telnet session using the Polycom HDX system IP address and portnumber — for example, telnet 10.11.12.13 24.You cannot use Telnet to access the system if Security Mode is enabled.Using the API Controller CodeIn cooperation with the leading touch panel controller manufacturers,Polycom Video Division is proud to offer its own version of controller codedesigned to run on Crestron systems. This independent code base wasdeveloped specifically to address issues of code compatibility with videosystem software releases. It provides a fully executable controller program butalso serves as a guideline for ongoing development using Polycom preferredmethodology and commands.Companion documents are also available to further explain how to interfaceyour controller with Polycom video systems and utilize the API efficiently. Toaccess the code, visit the A/V Professionals Solutions page atwww.polycom.com.3 - 3