Integrator's Reference Manual for Polycom HDX ... - 1 PC Network Inc

Integrator’s Reference Manual for Polycom HDX Systemsall unregisterSimultaneously unregisters all registered user feedback so that the API nolonger reports changes to the parameters.Syntaxall unregisterFeedback Examplesall unregistermight returncallstate unregisteredcamera unregisteredlinestate unregisteredmute unregisteredpip unregisteredpopupinfo unregisteredpreset unregisteredscreen unregisteredvcbutton unregisteredvolume unregisteredsleep unregisteredconfigchange unregisteredCommentsThe following types of parameters are unregistered:• Current near-site or far-site source• State of privacy• Current volume level• Active camera presets• Status of point-to-point or multipoint calls• Status of physical ISDN/IP connection to codec• PIP state• Chair control• System information• Gatekeeper statusSee AlsoThe unregisterall command on page 4-232 is an alias for this command.To register for user feedback, use the all register command on page 4-11 orthe registerall command on page 4-190.4 - 12