Integrator's Reference Manual for Polycom HDX ... - 1 PC Network Inc

System Commandsall registerRegisters for most commonly-used user registration events.Syntaxall registerFeedback Examplesall registermight returncallstate registeredcamera registeredchaircontrol registerlinestate registeredmute registeredpip registeredpopupinfo registeredpreset registeredscreen registeredvcbutton registeredvolume registeredsleep registeredCommentsRegisters changes to any of the following types of parameters:• Current near-site or far-site source• State of privacy• Current volume level• Active camera presets• Status of point-to-point or multipoint calls• Status of physical ISDN/IP connection to codec• PIP state• Chair control• System information• Gatekeeper statusThis command is particularly useful when two different control systems arebeing used simultaneously, such as the web and API commands. The systemmaintains the registration changes through restarts.To register for events not included in this feedback, refer to the specificregistration command.See AlsoThe registerall command on page 4-190 is an alias for this command.To unregister user feedback, use the all unregister command on page 4-12or the unregisterall command on page 4-232.4 - 11