Integrator's Reference Manual for Polycom HDX ... - 1 PC Network Inc

Integrator’s Reference Manual for Polycom HDX SystemspresetSets or gets the presets or goes (moves) to the presets for the near or far camerasource. Also registers or unregisters the API session to give notification whenthe user sets or goes to presets.Syntaxpreset preset register getpreset far perset near ParameterregisterunregisterfargosetDescriptionRegisters the system to give notification when the useror far site sets or goes to a preset. Returns the currentpreset registration state when followed by the getparameter.Disables register mode.Specifies the far camera. Requires a set or goparameter and a preset identifier.Moves the camera to a camera preset. Requires a“preset” parameter.Sets a camera preset. Requires a “preset”parameter.{0..15}, {0..99} Camera preset identifier. Must be an integer in therange {0..15} for a far-site camera or {0..99} for anear-site camera.nearSpecifies the near camera. Requires a set or goparameter and a preset identifier.Feedback Examples• preset registered• preset unregistered• preset near go 1• preset far set 3• preset near set 2causes the current location/position of the near-site camera to be saved aspreset 2CommentsUp to one hundred preset camera positions can be set. These camera presetscan be distributed across the far camera and up to four near-site cameras.4 - 176