12.07.2015 Views

Integrator's Reference Manual for Polycom HDX ... - 1 PC Network Inc

Integrator's Reference Manual for Polycom HDX ... - 1 PC Network Inc

Integrator's Reference Manual for Polycom HDX ... - 1 PC Network Inc

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

System CommandspriswitchSets or gets the PRI switch.Syntaxpriswitch getpriswitch set priswitch set Parametergetsetatt5ess|att4ess|norteldms|ni2|net5/ctr4|nttins-1500|ts-038DescriptionReturns the current switch protocol.Sets the PRI switch. One of the switch protocolparameters is required.Switch protocol values.For E1, net5/ctr4 is the default. net5/ctr4 is thestandard ETSI protocol derived from ITU Q.931.For T1, net5/ctr4 is also provided <strong>for</strong> certain Asiancountries, such as Japan, Hong Kong, and Taiwan.Feedback Examplespriswitch set att5essreturnspriswitch att5essCommentsIf more than one switch protocol is supported, you must find out from yourtelephone service provider which protocol to select. NET5/CTR4 is thedefault. It is the standard ETSI protocol derived from ITU Q.931. If you changethe country settings, a new set of PRI switch protocols is loaded.4 - 187

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!