Integrator's Reference Manual for Polycom HDX ... - 1 PC Network Inc

System CommandsadminpasswordSets or gets the remote access password. This command is not supported onthe serial port.Syntaxadminpassword getadminpassword set [“password”]Parametergetset“password”DescriptionReturns the current remote access password.Sets the password used for remote management of thesystem if followed by the password parameter. Toerase the current setting, omit the password parameter.User-defined password. Valid characters are: a throughz (lower and uppercase), -, _, @, /, ;, ,, ., \, 0through 9. The password cannot include spaces.Feedback Examples• cannot change password if one is not set (returned if no remote accesspassword is set)• adminpassword set Mypsswdreturnsadminpassword Mypsswd• adminpassword set “My psswd”returnserror: command has illegal parameters4 - 7