Integrator's Reference Manual for Polycom HDX ... - 1 PC Network Inc

System Commandsv35prefixSets or gets the V.35 dialing prefix. It assumes that a profile has already beenselected.Syntaxv35prefix get “valid speed”v35prefix set “valid speed” [“value”]ParametergetsetDescriptionReturns the current setting for “valid speed”.Sets the V.35/RS-449/RS-530 prefix when followed bya “value” parameter. To erase the current setting, omitthe “value”.“valid speed” Valid speeds are 56, 64, 2x56, 112, 2x64, 128, 168,192, 224, 256, 280, 320, 336, 384, 392, 7x64, 504,512, 560, 576, 616, 640, 672, 704, 728, 768, 784, 832,840, 14x64, 952, 960, 1008, 1024, 1064, 1088, 1120,1152, 1176, 1216, 1232, 1280, 1288, 21x64, 1400,1408, 1456, 1472, 1512, 1536, 1568, 1600, 1624,1664, 1680, 1728, 28x64, 1856, 1920, all.The parameter “all” lists all the available speeds andtheir associated dialing prefixes.“value”V.35/RS-449/RS-530 prefix, which is a function of yourDCE. Consult the DCE user guide for information.Feedback Examples• v35prefix 56 • v35prefix set 112 ”#005”associates the dialing prefix 005 to the speed 112 and returnsv35prefix set 112 #005• v35prefix set 112clears the dialing prefix for the speed 112 and returnsv35prefix set 112See AlsoSee the v35profile command on page 4-242.4 - 241