Integrator's Reference Manual for Polycom HDX ... - 1 PC Network Inc

System Commandsv35suffixSets or gets the V.35 dialing suffix. It assumes that a profile has already beenselected.Syntaxv35suffix get “valid speed”v35suffix set “valid speed” [“value”]ParametergetsetDescriptionReturns the current setting for valid speed.Sets the dialing suffix when followed by a “value”parameter. To erase the current setting, omit the“value” parameter.“valid speed” Valid speeds are 56, 64, 2x56, 112, 2x64, 128, 168,192, 224, 256, 280, 320, 336, 384, 392, 7x64, 504,512, 560, 576, 616, 640, 672, 704, 728, 768, 784, 832,840, 14x64, 952, 960, 1008, 1024, 1064, 1088, 1120,1152, 1176, 1216, 1232, 1280, 1288, 21x64, 1400,1408, 1456, 1472, 1512, 1536, 1568, 1600, 1624,1664, 1680, 1728, 28x64, 1856, 1920, all.The parameter “all” lists all the available speeds andtheir associated dialing prefixes.“value”The dialing suffix, which is a function of your DCE.Consult the DCE user guide for information.Feedback Examples• v35suffix 128 • v35suffix set 128 ”#4#2”associates the dialing suffix #4#2 to the speed 128 and returnsv35suffix set 128 #4#2CommentsUser interface screen location: System > Admin Settings > Network >V.35/RS-449/RS-530 (page 2): SuffixSee AlsoSee the v35profile command on page 4-242.4 - 243