12.07.2015 Views

Integrator's Reference Manual for Polycom HDX ... - 1 PC Network Inc

Integrator's Reference Manual for Polycom HDX ... - 1 PC Network Inc

Integrator's Reference Manual for Polycom HDX ... - 1 PC Network Inc

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Integrator’s <strong>Reference</strong> <strong>Manual</strong> <strong>for</strong> <strong>Polycom</strong> <strong>HDX</strong> SystemsisdnswitchSets or gets the ISDN switch protocol. This command is only applicable if youhave an ISDN network interface connected to your system.Syntaxisdnswitch getisdnswitch isdnswitch Parametergetpt-to-pt_at&t_5_ess|multipoint_at&t_5_ess|ni-1|nortel_dms-100|standard_etsi_euro-isdn|ts-031|ntt_ins-64DescriptionReturns the current switch protocol.Specifies the ISDN switch protocol to use.Feedback Examples• isdnswitch pt-to-pt_at&t_5_ess• isdnswitch multipoint_at&t_5_ess• isdnswitch ni-1• isdnswitch nortel_dms-100• isdnswitch standard_etsi_euro-isdn• isdnswitch ts-031• isdnswitch ntt_ins-64CommentsIf more than one switch protocol is supported, you must find out from yourtelephone service provider which protocol to select. If you change the countrysettings, a new set of ISDN switch protocols is loaded.See AlsoTo set the switch type <strong>for</strong> PRI systems, use the priswitch command onpage 4-187.4 - 136

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!