AT Command Set - Olitec

2 SMS-DELIVERs, except class 2 messages and messages inthe message waiting indication group (store message) arerouted directly to the TE using unsolicited result code:+CMT: , (PDU mode enabled)+CMT: ,, [,, , , , , ,] (text mode enabled)3 Class 3 SMS-DELIVERs are routed directly to the TE usingunsolicited result codes defined in =2. Messages of otherdata coding schemes result in indication as defined in =1.Rules for storing received CBMs depend on the relevant data codingmethod (refer to GSM 03.38 [2]), the setting of Select CBM Types(+CSCB) and this value:0 No CBM indications are routed to the TE.2 New CBMs are routed directly to the TE using unsolicited resultcode: +CBM: (PDU mode enabled)or +CBM: ,,,, (text mode enabled).3 Class 3 CBMs are routed directly to TE using unsolicited resultcodes defined in =2. 0 No SMS-STATUS-REPORTs are routed to the TE.1 SMS-STATUS-REPORTs are routed to the TE using unsolicitedresult code: +CDS: (PDU modeenabled) or +CDS: ,,[],[],,, (text mode enabled)2 If SMS-STATUS-REPORT is routed into ME/TA, indication ofthe memory location is routed to the TE using unsolicited resultcode: +CDSI: , 1 TA buffer of unsolicited result codes defined within this commandis cleared when 1...3 is entered.Unsolicited resultcodeSyntax of responses output when SMS is received:+CMTI: ,Indicates that new message has been received+CBMI: ,Indicates that new CB message has been received+CMT: , Short message is output directly+CBM: Cell broadcast message is output directlyDuring each SMS or Cell Broadcast Messages the Ring Line goes Logic “1“ forone second.Page 148 of 207