AT Command Set - Olitec

*# code Functionality Possible response(s)[C]...[C]#(varies with the serving network)C[C] (excluded 1[C])(varies with the serving network)Send USSD message +CME ERROR: /OK (see Chapter 4.48, p. 130)Send USSD message +CME ERROR: /OK (see Chapter 4.48, p. 130)Abbreviations of codes and responses used in Table 12Codes / parameters to be sent with ATDZZ = type of supplementary services:All servicesDN = dialling number: String of digits 0-9BS = basic serviceequivalent to parameter T = time in secondsPW = PasswordBarring services 330Voice 11FAX 13SMS 16SMS +FAX 12Voice + FAX 19Voice + SMS + FAX 10Data circuit asynchron 25Data circuit synchron 24PAD 27Packet 26Data circuit asynchron + PAD 21Data circuit synchron + packet 22Data circuit asynchron + syncron. + PAD 20All Services ---Not specifiedC = character of TE character set (e.g. asterix, hash or digit in case of USSD, or digits in case of held calls or multiparty calls)Possible responsesMode: 0 = not active, 1 = activeUnsolicited result code: 0 = presentation disabled, 1 = presentation enabledStatus: 0 = not active, 1 = activeRepresents BS = basic serviceSee Chapters 4.6 (AT+CCFC), 4.21 (AT+CLCK)Facility lock. See Chapter 4.21 (AT+CLCK)Call forwarding reasonFunction of *# codes for Supplementary Services*# code Abbreviation used in FunctionChapter 8.4* act Activate (except for CLIR, see list above)** reg Register and activate*# int Check status (interrogate)# deact Deactivate (except for CLIR, see list above)## eras Unregister and deactivatePage 205 of 207