AT Command Set - Olitec

More documents

Recommendations

Info

7.2 ^SSTN Remote-SAT NotificationProactiveCommandsEvery time the SIM application issues a proactive command, via the ME, the TAwill receive a notification. This indicates the type of proactive command issued.AT^SSTGI must then be used by the TA to request the parameters of the proactivecommand from the ME.Upon receiving the ^SSTGI response from the ME, the TA must send AT^SSTRto confirm the execution of the proactive command and provide any required userresponse, e.g. selected menu item.Unsolicited result code^SSTN: ParametersProactive command IDTerminateProactiveCommandWhen the SIM application has issued a proactive command, via the ME, to theTA, it is possible that this command must be terminated. The ^SSTN UnsolicitedResult Code is sent but with a different command type to indicate the terminationof the specified command.Unsolicited result code^SSTN: ParametersTerminate proactive command IDSIM Applicationreturns tomain menuReferenceSiemensNotification to the TA when the SIM Application has finished a command cycleand again enters its main menue.This URC should be used to open this menue on the sreen.Unsolicited result code^SSTN: NotePage 180 of 207
7.3 AT^SSTGI Remote-SAT Get InformationTest commandAT^SSTGI=?Response^SSTGI:(list of supported s), (list of supported s)OKRead commandAT^SSTGI?Response^SSTGI: , OKParameters Remote-SAT interface states (refer to AT^SSTA) Ongoing Proactive CommandWrite commandAT^SSTGI=Regularly this Write command is used upon receipt of an unsolicited result code^SSTN:.The TA is expected to acknowledge the ^SSTGI response with AT^SSTR toconfirm that the proactive command has been executed.AT^SSTR will also provide any user information, e.g. a selected menu item.The command type value is returned to the ME to identify which ^SSTN is beingresponded to.ReferenceSiemensNotePage 181 of 207
Page 1 and 2:
AT Command SetDocument non contract
Page 3 and 4:
2.35 AT&F Set all current parameter
Page 5 and 6:
5.14 AT+CSDH Show SMS text mode par
Page 7 and 8:
FiguresFigure 1: AT audio programmi
Page 9 and 10:
4.50 131 AT+VTS5.45.5135138AT+CMGLA
Page 11 and 12:
1 Introduction1.1 Scope of the docu
Page 13 and 14:
1.3 ConventionsThroughout the docum
Page 15 and 16:
1.5 Supported character setsThe ME
Page 17 and 18:
2 Standard V.25ter AT CommandsThese
Page 19 and 20:
2.5 ATD Mobile originated call to d
Page 21 and 22:
2.6 ATD> Originate call to phone nu
Page 23 and 24:
2.7 ATD> Originate call to phone nu
Page 25 and 26:
2.9 ATDI Mobile originated call to
Page 27 and 28:
2.11 ATE Enable command echoWrite c
Page 29 and 30:
2.15 ATL Set monitor speaker loudne
Page 31 and 32:
2.21 ATS3 Write command line termin
Page 33 and 34:
2.27 ATS10 Set disconnect delay aft
Page 35 and 36:
2.32 ATZ Set all current parameters
Page 37 and 38:
2.35 AT&F Set all current parameter
Page 39 and 40:
2.36 AT&S Set circuit Data Set Read
Page 41 and 42:
2.38 AT&W Store current configurati
Page 43 and 44:
2.42 AT+GMR Request TA revision ide
Page 45 and 46:
2.45 AT+IPR Set fixed local rateTes
Page 47 and 48:
3 AT Commands for FAXThe following
Page 49 and 50:
3.4 AT+FCIG Query or set the Local
Page 51 and 52:
3.8 AT+FDCC Query or set capabiliti
Page 53 and 54:
3.10 AT+FDIS Query or set session p
Page 55 and 56:
3.13 AT+FET End a page or documentW
Page 57 and 58:
3.19 AT+FPHCTO DTE Phase C Response
Page 59 and 60:
3.25 AT+FTM Transmit DataTest comma
Page 61 and 62:
4 AT Commands originating from GSM
Page 63 and 64:
indicate year (two last digits), mo
Page 65 and 66:
4.3 AT+CAMM Accumulated call meter
Page 67 and 68:
4.5 AT+CBST Select bearer service t
Page 69 and 70:
tion:1 voice2 data4 fax8 short mess
Page 71 and 72:
4.7 AT+CCLK Real Time ClockTest com
Page 73 and 74:
4.9 AT+CCWA Call waitingTest comman
Page 75 and 76:
4.10 AT+CEER Extended error reportT
Page 77 and 78:
can issue AT+CFUN=1 to stop power s
Page 79 and 80:
4.11.1 Wake up the ME from SLEEP mo
Page 81 and 82:
4.15 AT+CGSN Request product serial
Page 83 and 84:
4.19 AT+CIND Indicator controlMC35
Page 85 and 86:
4.20 AT+CLCC List current calls of
Page 87 and 88:
“PF”“PN”“PU”“PP”“
Page 89 and 90:
AT+CPIN=9999OKTo lock the mobile to
Page 91 and 92:
4.21.3 Examples: Call barringPlease
Page 93 and 94:
4.23 AT+CLIR Calling line identific
Page 95 and 96:
4.25 AT+CMEE Report mobile equipmen
Page 97 and 98:
eceived. See also Chapter 4.46."ser
Page 99 and 100:
4.28 AT+CMUX Enter multiplex modeMC
Page 101 and 102:
Command Behaviour on channel 1 Diff
Page 103 and 104:
4.30 AT+COPS Operator selectionThis
Page 105 and 106:
4.31 AT+CPAS Mobile equipment activ
Page 107 and 108:
4.33 AT+CPBS Select phonebook memor
Page 109 and 110:
4.35 AT+CPIN Enter PINTest commandA
Page 111 and 112:
the current status and activate an
Page 113 and 114:
SIM locks:Call barring:These are fa
Page 115 and 116:
changes to READY. After 300s, a rep
Page 117 and 118:
4.38 AT+CPWD Change passwordUse thi
Page 119 and 120:
To specify a new "PS" lock password
Page 121 and 122:
4.40 AT+CRC Set Cellular Result Cod
Page 123 and 124:
If =1 and there is a change in the
Page 125 and 126:
4.43 AT+CRSM Restricted SIM accessT
Page 127 and 128:
4.45 AT+CSNS Single Numbering Schem
Page 129 and 130: 4.47 AT+CSSN Supplementary service
Page 131 and 132: 4.49 AT+VTD= Tone durationTest comm
Page 133 and 134: 5 AT commands originating from GSM
Page 135 and 136: 5.4 AT+CMGL List SMS messages from
Page 137 and 138: converted into characters; type of
Page 139 and 140: GSM 03.40 TP- Destination-Address A
Page 141 and 142: 5.6 AT+CMGS Send SMS messageTest co
Page 143 and 144: 5.7 AT+CMGW Write SMS message to me
Page 145 and 146: 5.8 AT+CMSS Send SMS message from s
Page 147 and 148: 5.10 AT+CNMI New SMS message indica
Page 149 and 150: ReferenceGSM 07.05General remarks:
Page 151 and 152: no matter whether or not there is f
Page 153 and 154: 5.13 AT+CSCB Select cell broadcast
Page 155 and 156: 5.15 AT+CSMP Set SMS text mode para
Page 157 and 158: 6 GPRS AT commands in accordance wi
Page 159 and 160: 6.1.3 AT+CGDATA Enter data stateTes
Page 161 and 162: Packet Data Protocol type is a stri
Page 163 and 164: Parameternumeric PDP Context Identi
Page 165 and 166: OKat+cgqmin=1,1OKat+cgqmin?+CGQMIN:
Page 167 and 168: numeric parameter for the precedenc
Page 169 and 170: at+cgqreq=1,1OKat+cgqreq?+CGQREQ:1,
Page 171 and 172: 6.1.8 AT^SGAUTH Set type of authent
Page 173 and 174: 6.3.1 ATD *98# Request GPRS IP serv
Page 175 and 176: 6.4 Using GPRS AT commands (example
Page 177 and 178: 6.5 Using the GPRS dial command ATD
Page 179: 7.1 AT^SSTA Remote-SAT Interface Ac
Page 183 and 184: 8 APPENDIX8.1 Summary of ERRORS and
Page 185 and 186: 8.1.3 Summary of CMS ERRORS related
Page 187 and 188: Example 2The application tries to s
Page 189 and 190: Message Meaning How to activateURC+
Page 191 and 192: 8.1.5 Result codesIndication Numeri
Page 193 and 194: 8.1.9 GSM release cause for Mobilit
Page 195 and 196: Number Description50 Requested faci
Page 197 and 198: Number Description309 Linked Respon
Page 199 and 200: 8.1.19 SIEMENS release cause for Em
Page 201 and 202: AT commandRequired PINAT+CR PIN 1AT
Page 203 and 204: AT command Test Read Write / NoteEx
Page 205: *# code Functionality Possible resp
show all

AT Command Set - Olitec

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?