AT Command Set - Olitec

4.21.3 Examples: Call barringPlease note that when you configure or query call barring without specifying any classes, the settingswill refer to classes 1, 2 and 4 only (default setting).Remember that most of the call barring types have to be subscribed to. Usually, the service is subjectto a password supplied from the provider.Example 1Example 2When checking the status of barring for outgoing international calls withoutspecifying classes, please note that the ME returns only the status of voice,data, fax calls. The status of SMS and other classes is not reported.at+clck=oi,2,0000 or without : at+clck=oi,2+CLCK: 1,1 outgoing international voice calls barred+CLCK: 1,2 outgoing international data calls barred+CLCK: 1,4 outgoing international fax calls barredOKTo check the call barring status for outgoing international calls and all classes,you are required to enter the integer sum referring to all classes:at+clck=oi,2,0000,255 or without : at+clck=oi,2,,255+CLCK: 1,1 outgoing international voice calls barred+CLCK: 1,2 outgoing international data calls barred+CLCK: 1,4 outgoing international fax calls barred+CLCK: 1,8 outgoing international SMS barred+CLCK: 0,16 no barring (e.g. not supported or not activated at all)+CLCK: 1,32 outgoing international data calls barred+CLCK: 0,64 no barring (e.g. not supported or not activated at all)+CLCK: 0,128 no barring (e.g. not supported or not activated at all)OKExample 3To activate call barring for outgoing international voice and data calls:at+clck=oi,1,0000,3 (where 3 is the sum of class 1 + class 2)OKExample 4 To disable call barring for outgoing international fax (class 4) and SMS (class 8)calls:at+clck=oi,0,0000,12 (where 12 is the sum of class 4 + class 8)OKExample 5To disable call barring for all outgoing international calls:at+clck=oi,0,0000,255OKPage 91 of 207