AT Command Set - Olitec

4.22 AT+CLIP Calling line identification presentationThis command refers to the GSM supplementary service CLIP (Calling Line Identification Presentation)that enables a called subscriber to get the calling line identity (CLI) of the calling party when receivinga mobile terminated call.Test commandAT+CLIP=?Read commandAT+CLIP?Write commandAT+CLIP=Unsolicited resultcodeResponse+ CLIP: (list of supported s) OKParameterSee write commandResponse+CLIP: , OKIf error is related to ME functionality:+CME ERROR: ParameterSee write commandSet command enables or disables the presentation of the CLI at the TE. It has noeffect on the execution of the supplementary service CLIP in the network.ResponseOKIf error is related to ME functionality:+CME ERROR: Parameter 0 suppress unsolicited result codes1 display unsolicited result codes 0 CLIP not provisioned1 CLIP provisioned2 unknownWhen CLIP is enabled at the TE (and is permitted by the calling subscriber), anunsolicited result code is returned after every RING (or +CRING: ) at amobile terminating call.Voice call response format:+CLIP: , ,,,,Data/FAX call response format:+CLIP: , ReferenceGSM 07.07Parameter string type phone number of calling address in format specified by type of address octet in integer format; 145 when dialling string includesinternational access code character “+”, otherwise 129.Note0 CLI valid1 CLI has been withheld by the originator.2 CLI is not available due to interworking problems or limitationsof originating network. shall be an empty string ("")and value will not be significant.Page 92 of 207