AT Command Set - Olitec

3.25 AT+FTM Transmit DataTest commandAT+FTM=?Response(List of supported modulation modes) OKParameterSee write commandWrite commandAT+FTM=This command causes the TA to transmit data using the modulation mode definedbelow. An ERROR response code results if this command is issued whilethe modem is on-hook.ResponseCONNECTIf error is related to ME functionality:ERRORParametermodulation mode96 V.29 9600 bps72 V.29 7200 bps48 V.27ter 4800 bps24 V.27ter 2400 bpsReferenceTIA/EIA-578NoteUsed for Fax class 1 only3.26 AT+FTS Stop Transmission and WaitWrite commandAT+FTS=This command causes the TA to terminate a transmission and wait for 10millisecond intervals before responding with the OK result code to the DTE.ResponseAn ERROR response code results if this command is issued while the modem ison-hook.Parameter 0 – 85 no. of 10 millisecond intervalsReferenceTIA/EIA-578NoteUsed for Fax class 1 onlyPage 59 of 207