AT Command Set - Olitec
AT Command Set - Olitec
AT Command Set - Olitec
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
3.4 <strong>AT</strong>+FCIG Query or set the Local polling idTest command<strong>AT</strong>+FCIG =?Read command<strong>AT</strong>+FCIG?Response(max. length of Local Polling ID string) (range of supported ASCII charactervalues) OKParameterSee write commandResponse OKParameterSee write commandWrite command<strong>AT</strong>+FCIG =ResponseOKParameterLocal Polling ID string, max. length and possible content as reportedby test command. Default value is empty string (“”).ReferenceEIA PN-2388NoteSee also “<strong>AT</strong>+FLID Query or set the Local Id setting capabilities”, pg. 55.Used for Faxclass 2 only3.5 <strong>AT</strong>+FCLASS Fax: Select, read or test service classTest command<strong>AT</strong>+FCLASS=?Read command<strong>AT</strong>+FCLASS?Write command<strong>AT</strong>+FCLASS=See introduction to fax commands, pg. 47.Response(list of supported s)OKParameterSee write commandResponse OKParameterSee write commandThe ME is set to a particular mode of operation (data, fax). This causes the MAto process information in a manner suitable for that type of information.ResponseOKParameterReferenceEIA/TIA-592-A 0 data (e.g. EIA/TIA-602 or ITU V.25ter)Note1 Fax class 1 (EIA/TIA-578-A, Service Class 1)2 Fax class 2 (EIA/TIA SP-2388, an early draft version ofEIA/TIA-592-A – Service class 2.1)Using Error Correcting Mode (ECM) when sending FAXes over GSM should beavoided.Page 49 of 207
Change language