AT Command Set - Olitec
AT Command Set - Olitec
AT Command Set - Olitec
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
4.20 <strong>AT</strong>+CLCC List current calls of METest command<strong>AT</strong>+CLCC=?ResponseOKParametersExecute command<strong>AT</strong>+CLCCResponseTA returns a list of current calls of ME. If command successful, but no calls areavailable, no information response is sent to TE.[+CLCC: ,,,,,[,,[]]][+CLCC: ,,,,,[,,[]]][...]]] OKIf error is related to ME functionality:+CME ERROR: ParametersInteger type; call identification number as described in GSM02.30[19] subclause 4.5.5.1; this number can be used in +CHLDcommand operations 0 mobile originated (MO) call1 mobile terminated (MT) callstate of the call:0 active1 held2 dialing (MO call)3 alerting (MO call)4 incoming (MT call)5 waiting (MT call)bearer/teleservice:0 voice1 data2 fax9 unknown 0 call is not one of multiparty (conference) call parties1 call is one of multiparty (conference) call partiesstring type phone number in format specified by type of address octet in integer format; 145 when dialling string includesinternational access code character “+”, otherwise 129string type alphanumeric representation of correspondingto the entry found in phonebook; used character set should bethe one selected with command Select TE Character <strong>Set</strong> +CSCSReferenceGSM 07.07NotePage 85 of 207
Change language