Instruction Manual - Sierra Instruments

More documents

Recommendations

Info

Sierra Instruments Instruction ManualSmartTrak ® 100 SeriesIMPORTANT SAFETY NOTES ABOUT PURGINGWARNING: When toxic or corrosive gases are used,purge unit thoroughly with inert dry gas beforedisconnecting from the gas line to prevent personnelfrom being injured when coming in contact with theinstrument.WARNING: If an instrument used with a toxic orcorrosive gas is returned to the factory, a MaterialSafety Data Sheet (MSDS) must be enclosed &attached to the outside of the box to alert Sierrapersonnel of the potential hazard. Also, make sure theinlet & outlet are securely sealed.26
Sierra Instruments Instruction ManualSmartTrak ® 100 SeriesCHAPTER 4: Digital Operation with Pilot ModuleYour SmartTrak instrument may be operated in three different ways:THREE CONTROL OPTIONSA. Analog Input/Output Operation (Chapter 3): Using analoginput/output signals at the HD DB-15 connector.B. Digital Operation with Pilot Module (This Chapter): Using theoptional Pilot Module.C. Digital Operation with RS-232 and SmartTrak Software (Chapter5): Using the RS-232 SmartTrak Software package and a computer runningthe Windows operating system.This chapter will discuss the second of these—Digital Operation with the optionalPilot Module. Please see alternate chapters for other options.Although you have chosen to use the optional Pilot Module, please note that all theAnalog control functions are still available on your instrument. Consult Chapter 3for details on Analog operation. Also, computer control using the RS-232communication is available. See Chapter 5 for details on operation with a computer.CAUTION—If RS-232 digital communication is to be used in conjunction with thePilot Module, the HD DB15 connector must be properly wired with a three wireserial DB9 cable to your computer. Often, this is done with the same HD DB15 thatsupplies power to your instrument. You can run both RS-232 communication andPilot Module communications in parallel, but the unit will only respond to one set ofcommands at a time. DO NOT attempt to control the unit simultaneously with boththe Pilot Module and the computer, this can lock up the unit.Introduction to Pilot Module Features and CapabilitiesThe optional Pilot Module functions as both display and a control unit for yourSmartTrak instrument. The standard Pilot Module is available mounted directly onthe face of your instrument or as a handheld / remote mountable control interfaceattached to the SmartTrak via a detachable cable.If your instrument has a standard Pilot Module mounted locally on the face of theunit, no additional set-up is required. See picture below.27
Page 1 and 2: Sierra Instruments Instruction Manu
Page 13: Sierra Instruments Instruction Manu
Page 22 and 23: ATP: 1Fiscal Year: 2012STIP for FY
Page 76 and 77:
Sierra Instruments Instruction Manu
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
Sierra Instruction Manual SmartTrak
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
show all

Instruction Manual - Sierra Instruments

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?