Instruction Manual - Sierra Instruments

Sierra Instruments Instruction ManualSmartTrak ® 100 Seriessetpoint reference for the instrument. As a result, the valve will be closed.However, the valve will return to the state it was in the last time the instrument wasoperated.CAUTION: If you do not know the position of the valve before it was shutdown, you must assume that the valve will open when power is applied. Takenecessary precautions.Power Up Your ComputerApply power to your computer per the manufacturer’s recommendations. TheSmartTrak Software is compatible with any computer running the followingWindows Operating Systems:Windows 98, 2 nd EditionWindows XPWindows XP ProfessionalWindows 2000Loading the SmartTrak SoftwareIf you are using your SmartTrak instrument or your computer for the first time, it isnecessary to install the SmartTrak Software into your computer. If this software isalready installed, skip this section. If you want to upgrade the SmartTrak Softwarebecause you have a higher revision, continue below.Each SmartTrak order is shipped with a CD-ROM containing the SmartTrakSoftware. Locate this disk. At this point, EXIT OUT OF ANY OPENAPPLICATIONS BEING RUN ON YOUR COMPUTER.PROCEDURE:1. Insert the SmartTrak Software CD into your CD-ROM2. Open “My Computer” on your desktop3. Open the CD Named: “SmartTrak” on your D-drive4. Run “setup.exe”5. Follow the instructions on screen50