Instruction Manual - Sierra Instruments

More documents

Recommendations

Info

Sierra Instruments Instruction ManualSmartTrak ® 100 SeriesRunning the SmartTrak SoftwareLocate the file named “SmartTrak” and open it. You will see the following screen:This is the main data screen. First, you must select the proper comport.Select the comport pull down menu:Use the pull-down menu to choose the port number that corresponds to the serialport channel your SmartTrak is connected to (from 1 to 255). If you have only oneserial port, select “Comm Port 1.” When finished, click on the box marked “OK.”You will be returned to the the SmartTrak Master Screen. The screen is the samefor both meters and controllers. Controller functions will not be active for metersand vice versa54
Sierra Instruments Instruction ManualSmartTrak ® 100 SeriesEstablishing CommunicationIf the Screen appears with all the yellow and white boxes full, the SmartTrakinstrument has established communication with your computer.Proceed to the next section.If the screen appears, but the yellow and white boxes are all empty, you haveselected the wrong “Com Port number.” See the section titled “Com Port” on page5-16 for instructions on how to change the communication port number.If the screen appears, but only the Mass Flow box shows a value, you are using thecorrect Com Port, but your computer is not talking to the SmartTrak. To begincommunication, move the mouse pointer to the top center screen and left click onthe words “Get Parameters.” then values will fill all the boxes on the screen.Communication has been established. Your computer is now able to control yourSmartTrak instrument.Your SmartTrak instrument is now ready for use!55
Page 1 and 2:
Sierra Instruments Instruction Manu
Page 3 and 4: Sierra Instruments Instruction Manu
Page 13: Sierra Instruments Instruction Manu
Page 22 and 23: ATP: 1Fiscal Year: 2012STIP for FY
Page 92 and 93: Sierra Instruction Manual SmartTrak
show all

Instruction Manual - Sierra Instruments

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?