Instruction Manual - Sierra Instruments

Sierra Instruments Instruction ManualSmartTrak ® 100 SeriesEstablishing CommunicationIf the Screen appears with all the yellow and white boxes full, the SmartTrakinstrument has established communication with your computer.Proceed to the next section.If the screen appears, but the yellow and white boxes are all empty, you haveselected the wrong “Com Port number.” See the section titled “Com Port” on page5-16 for instructions on how to change the communication port number.If the screen appears, but only the Mass Flow box shows a value, you are using thecorrect Com Port, but your computer is not talking to the SmartTrak. To begincommunication, move the mouse pointer to the top center screen and left click onthe words “Get Parameters.” then values will fill all the boxes on the screen.Communication has been established. Your computer is now able to control yourSmartTrak instrument.Your SmartTrak instrument is now ready for use!55