Installation Instructions for a âPairâ of gates...

More documents

Recommendations

Info

2.5 - Wiring in the Tuned AntennaANTENNA WIRINGPOINT2.6 - Coding the Remote Controls1. REMOVE THE BATTERY COVER & CASING OF THE REMOTE CONTROL HANDSET TOREVEAL THE DIAGRAM BELOW2. SET THE BANK OFDIPSWITCHES ONALL REMOTES TOEXACTLY THE SAMECODE OF YOURCHOICE.ONOFF7 8 9 10Bat1BattB tON1 2 3 4 5 6 7 8 9 10Battery 12V3. UNLESS PROGRAMMING FORGATES AND GARAGE DOORS TOOPEN BY REMOTE CONTROL FROMTHE SAME HANDSET ENSURETHAT THE JUMPER STRAPS SHOWNHERE ARE IN THE SAME POSITIONSON ALL REMOTES.2.7 - Powering up the Control PanelCONNECT PROTECTED MAINS POWER TO TERMINALS L1 + L2 IN THE CONTROL PANEL (L2BEING LIVE!). ENSURE THAT THE CONTROL PANEL IS ADEQUATELY EARTHED.11
END OF INSTALLATIONSTAGE 2BEFORE STARTING STAGE 3 -Commissioning the Control PanelPLEASE CHECK THAT YOU HAVE CORRECTLY:RefPage1. FITTING THE CONTROL PANELIN THE CASING 2.1 2.1 81. WIRED THE MOTORS AS SHOWN (Fig 7) 2.2 92. WIRED IN THE SAFETY PHOTOCELLSAS SHOWN (Fig 8) 2.3 103. INSERTED THE RADIO FREQUENCYCARD AS SHOWN (Fig 9) 2.4 104. WIRED IN THE TUNED ANTENNACODED AS SHOWN (Fig 10) 2.5 115. PROGRAMMED THE REMOTE CONTROLSAS SHOWN (Fig 11) 2.6 116. POWERED UP THE CONTROL PANEL 2.7 11NOW STAGE 2 IS FULLY COMPLETED YOU ARE READY TOBEGIN STAGE 3 OF YOUR FROG AUTOMATION KITINSTALLATION12
Page 4 and 5: STAGE 1CIVIL & MECHANICAL SECTION1.
Page 6 and 7: 1.4 - Installing the MotorsINSERT T
Page 8 and 9: END OF INSTALLATIONSTAGE 1BEFORE ST
Page 10 and 11: 2.2 - Wiring the MotorsTHE FROG MOT
Page 15 and 16: ONOFF1 2 35. SELECT DIPSWITCHES 1 &
Page 17 and 18: 3.4 - Automatic Close & Activating
Page 19 and 20: END OF INSTALLATIONSTAGE 3PLEASE CH
Page 21 and 22: PROBLEMGATES WILL NOT RESPOND TOREM
Page 23 and 24: 5.4 - Motor Torque SettingsSEE ALSO
Page 25 and 26: Other functions available:Automatic
Page 27 and 28: 5.7 - Control Panel AdjustmentsTrim
Page 29 and 30: 5.9 - Re-Handing the Frog MotorsCEN

Installation Instructions for a âPairâ of gates...

Create successful ePaper yourself

Delete template?

Save as template?

Installation Instructions for a âPairâ of gates...