Installation Instructions for a “Pair” of gates...

ONOFF1 2 35. SELECT DIPSWITCHES 1 & 2 OFF FORCOMMISSIONING6. ENSURE HARD WIRE LINK IS FITTEDBETWEEN TERMINALS 1 & 2 AND2 & C110 11 S 1 2 3 3P 4 5 7 2 C1 CX B1 B23.2 - Opening & Closing the GatesL1 L2 U V W X Y E1 10 11 1 2 3 5 7 C11. MOMENTARILY PULSE TERMINALS2 & 3 WITH A PIECE OF WIRETRAILING FROM TERMINAL 2 ANDMOMENTARILY TOUCHINGTERMINAL 3.THE GATES SHOULD START TOOPEN. IF THEY START TO CLOSETURN THE POWER OFF TO THECONTROL PANEL AND CHANGEAROUND EITHER U-V (MOTOR 1) ORX-Y (MOTOR 2) TO CHANGETHE MOTOR DIRECTION.L1 L2 U V W X Y E1 10 11 1 2 3 5 7 C12. ONCE YOU HAVE PROVED THEMOTOR DIRECTION USETERMINALS 2 & 7 TO OPEN ANDCLOSE THE GATES WITH ATRAILING WIRE ONCE AGAIN INTOTERMINAL 2, MOMENTARILYTOUCHING TERMINAL 7.14