Installation Instructions for a âPairâ of gates...

More documents

Recommendations

Info

GEARMOTORFROG AWEIGHT5 - TECHNICAL INFORMATION5.1 - Technical SpecificationPOWERSUPPLY11 kg 230V a.cCURRENT1,9 APOWER200 WDUTYCYCLEMAX.TORQUE30% * 320 NmREDUCTIONTRAVELTIME1/1152 18 sec.CAPACITOR16 uFFROG AV11 kg230V a.c2,5 A300 W30%* 320 Nm1/11529 sec.20 uF* Can be adjusted using CAME control panelsBOLT FOR REMOVAL &INSERTION OF M6 GREASENIPPLE(NOT SUPPLIED)5.2 - Casting Dimensions60mm160mm405mm330mm5.3 - Operating LimitsWIDTH OF GATE2.00 m2.50 m*3.50 mWEIGHT OF GATE800 Kg600 Kg400 Kg* AN ELECTRIC LOCK IS SUGGESTED WHEN THE GATE WING ISWIDER THAN 3.5M21
5.4 - Motor Torque SettingsSEE ALSO PAGE 14To vary the motor torque, move the indicated spade connector to one <strong>of</strong> the four position: 1=min, 4=max.N.B. It is always best to start from position one and increase the torque setting asrequired.ZA422
Page 4 and 5: STAGE 1CIVIL & MECHANICAL SECTION1.
Page 6 and 7: 1.4 - Installing the MotorsINSERT T
Page 8 and 9: END OF INSTALLATIONSTAGE 1BEFORE ST
Page 10 and 11: 2.2 - Wiring the MotorsTHE FROG MOT
Page 12 and 13: 2.5 - Wiring in the Tuned AntennaAN
Page 15 and 16: ONOFF1 2 35. SELECT DIPSWITCHES 1 &
Page 17 and 18: 3.4 - Automatic Close & Activating
Page 19 and 20: END OF INSTALLATIONSTAGE 3PLEASE CH
Page 21: PROBLEMGATES WILL NOT RESPOND TOREM
Page 25 and 26: Other functions available:Automatic
Page 27 and 28: 5.7 - Control Panel AdjustmentsTrim
Page 29 and 30: 5.9 - Re-Handing the Frog MotorsCEN

Installation Instructions for a âPairâ of gates...

Create successful ePaper yourself

Delete template?

Save as template?

Installation Instructions for a âPairâ of gates...