PENTAGRAM Cerberus [P 6367] Installation and Operation Manual

PENTAGRAM Cerberus [P 6367]Configuring the router - forewordRouter's configuration settings are available on it’s configuration page, which can be accessedusing any Web browser.NOTE:It is advised to carry out the initial router configuration from a computer connected tothe router via Ethernet cable.Default settingsBefore configuring the router, we recommend reviewing the default settings for key routerparameters shown below.IP address 192.168.1.100Subnet mask 255.255.255.0SSIDPENTAGRAM_P6367DHCP serverEnabledDHCP server address pool100 IP addressesfrom 192.168.1.101to 192.168.1.200IP address lease time86400 seconds (24 hours)User nameadminPasswordpentagramNOTE:• We recommend that you change the access password for the router’s configuration page assoon as possible.• If you ever forget the access password for the router, please reset the device to its defaultsettings.• To avoid possible conflicts with other Wi-Fi networks, its recommended to change router'snetwork SSID to something more unique.Restoring default settingsThe router can be restored to its default settings in two ways:• by clicking the Restore button on the System Tools > Restore to Factory tab on the router’sconfiguration page; or• by pressing and holding the RESET/WPS button on the back of the device for approx. 10seconds.14