PENTAGRAM Cerberus [P 6367] Installation and Operation Manual

More documents

Recommendations

Info

PENTAGRAM Cerberus [P 6367]DDNS [3G Router, WISP or Wireless Router Mode]DDNS is short for Dynamic Domain Name Server, and it takes effect in 3G router, WISP andwireless router modes. It is to assign a fixed host and domain name to a dynamic Internet IPaddress, which is used to monitor hosting website, FTP server and so on behind the Router. Ifyou want to activate this function, please select Enable and a DDNS service provider to sign up.Owing to ISP most times provides dynamic IP address, DDNS is used to capture the changeableIP address and match the fixed domain. Then users can have access to the Internet tocommunicate with others. DDNS can help you establish virtual host in your home and company.Service Provider: Select one from the drop-down menu and click Sign up for registration.User Name: Enter the user name the same as the registration name.Password: Enter the password the same as the registration password.Domain Name: Enter the effective domain name which is optional.Backup/Restore SettingsBackup Settings1. Click Backup button to export the configuration files and select the path to save it.2. Click Save to save the configuration files.Restore Settings1. Click Browse button to select the backup files.2. Click Restore button to restore the previous settings.44
PENTAGRAM Cerberus [P 6367]Restore to Factory Default SettingsThis button is to restore all settings to the default values.NOTE:Click Restore to Factory Default Settings, and the router will reboot automatically.Firmware UpgradeBy upgrading the router’s firmware, you’ll get more stable firmware version and appreciatedrouting function. For upgrading files, you can download from www.pentagram.eu .Browse: click this button to select the upgrade file.Upgrade: click this button to start the upgrading process. After the upgrade is completed, theRouter will reboot automatically.NOTE:Do not disconnect the device during the upgrading process.Reboot the RouterRebooting the Router makes the settings configured go into effect or to set the Router again ifsetting failure happens.Reboot the router: Click this button to reboot the device.45
Page 1: ENInstallation and Operation Manual
Page 6 and 7: PENTAGRAM Cerberus [P 6367]Router w
Page 8 and 9: PENTAGRAM Cerberus [P 6367]Operatin
Page 10 and 11: PENTAGRAM Cerberus [P 6367]Connecti
Page 12 and 13: PENTAGRAM Cerberus [P 6367]Windows
Page 14 and 15: PENTAGRAM Cerberus [P 6367]Configur
Page 16 and 17: PENTAGRAM Cerberus [P 6367]Setup Wi
Page 18 and 19: PENTAGRAM Cerberus [P 6367]Wireless
Page 20 and 21: PENTAGRAM Cerberus [P 6367]WAN Sett
Page 22 and 23: PENTAGRAM Cerberus [P 6367]ADSL Vir
Page 24 and 25: PENTAGRAM Cerberus [P 6367]DNS Sett
Page 26 and 27: PENTAGRAM Cerberus [P 6367]BSSID: B
Page 28 and 29: PENTAGRAM Cerberus [P 6367]WPA2-Per
Page 30 and 31: PENTAGRAM Cerberus [P 6367]Advanced
Page 32 and 33: PENTAGRAM Cerberus [P 6367]Reset OO
Page 34 and 35: PENTAGRAM Cerberus [P 6367]DHCP Lis
Page 36 and 37: PENTAGRAM Cerberus [P 6367]DMZ Sett
Page 38 and 39: PENTAGRAM Cerberus [P 6367]Traffic
Page 40 and 41: PENTAGRAM Cerberus [P 6367]URL Filt
Page 42 and 43: PENTAGRAM Cerberus [P 6367]Remote W
Page 46 and 47: PENTAGRAM Cerberus [P 6367]Change P
Page 48: PENTAGRAM Cerberus [P 6367]NOTES48

PENTAGRAM Cerberus [P 6367] Installation and Operation Manual

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?