PENTAGRAM Cerberus [P 6367] Installation and Operation Manual

PENTAGRAM Cerberus [P 6367]Wireless Basic SettingsNetwork Mode: Select one mode according to the using environment, and you are recommendedto use the 11b/g/n mixed mode.SSID: SSID (Service Set Identifier) is the unique name of the wireless network. You can changeit to other names.Broadcast SSID: Select Enable to enable the device's SSID to be visible by your wireless devices.The default is enabled.Channel: The wireless frequency used by wireless network. You are not recommended to usethe same channel that used by other SSIDs for using the same or neighboring channels wouldcause mutual interference and reduce the router’s transmission rate.Please refer to Basic Settings chapter on page 25 for other settings.Wireless Security SettingsIt is suggested that you choose WPA2-Personal for Security Mode and AES for WPA Algorithms,you only need to input 8~63-bit Pass Phrase combined with numbers, letters and characters.Click Next to save the configuration. More details please refer to the following section.18