PENTAGRAM Cerberus [P 6367] Installation and Operation Manual

PENTAGRAM Cerberus [P 6367]Security Settings [3G Router, WISP or Wireless Router Mode]Client FilterTo better manage the computers in LAN, you can control LAN computers’ access to some portson Internet by data packet filters function.Client Filtering Setting: Check to enable client filter.Access Policy: Select one number from the drop-down menu.Enable: Check to enable the access policy.Filtering mode: Select Disable to forbid the filtered hosts’ corresponding ports to access theInternet at a specified time. Select Enable to permit the filtered hosts’ corresponding ports toaccess the Internet at a specified time.Start/End IP: Enter the starting/ending IP address.Port: Enter the controlled TCP/UDP protocol port; and it can be a port range.Type: Select the protocol used by the controlled data packets (TCP, UDP or Both).Time: Select the time range of client filter rule.Date: select according to your needs.Apply: Select Apply to enable the settings.39