PENTAGRAM Cerberus [P 6367] Installation and Operation Manual
PENTAGRAM Cerberus [P 6367] Installation and Operation Manual
PENTAGRAM Cerberus [P 6367] Installation and Operation Manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>PENTAGRAM</strong> <strong>Cerberus</strong> [P <strong>6367</strong>]your ISP or network administrator.Primary DNS Address: Enter the necessary address provided by your ISP.Secondary DNS Address: Enter the second address if your ISP provides, <strong>and</strong> it is optional.Host Name: The device’s WINS name which you can use to visit the device.NOTE:Once you changed the IP address of the LAN port, you should use the new IP to enterthe WEB management interface.WLAN SettingsBasic SettingsEnable Wireless: Tick to enable the Router’s wireless features. If you don’t want to use thisfeature, you can disable it <strong>and</strong> all functions related with wireless will be disabled.Network Mode: From this drop-down menu, you can select the wireless st<strong>and</strong>ards running onyour network. The default is 11b/g/n mode.• 11b mode: Select it if you have only Wireless-B devices.• 11g mode: Select it if you have only Wireless-G devices.• 11b/g mixed mode: Select it if you have only Wireless-B <strong>and</strong> Wireless-G devices.• 11b/g/n mixed mode: Select it if you have Wireless-B, Wireless-G <strong>and</strong> Wireless-N devices.SSID: SSID (Service Set Identifier) is the unique name of the wireless network. Enter this SSIDfor wireless devices to have access to the router. You can either customize a network name oruse the default.Broadcast (SSID): Select Enable to enable the router’ SSID to be scanned by wireless devices.The default is Enabled. If you disable it, the wireless devices must know the SSID forcommunication.25