z/OS V1R9.0 TSO/E Command Reference

PRINTDS Commandrecord to determine whether the data set should be processed as a DCFdata set. If you specify NODCF, PRINTDS does not check the data set.DEST{destination | destination.user_id}specifies the destination of a remote workstation or a user at a specific remoteworkstation to which the output is routed for processing. You can specify from 1to 8 characters for either destination or user_id.For information about the destination format systemname.printername, seez/OS JES2 Initialization and Tuning Guide.Or, if you specified a default destination in the SYS1.UADS data set, the DESToutput descriptor overrides the destination in SYS1.UADS. See z/OS JES3Initialization and Tuning Guide.FCB(fcb_name)specifies the name of the forms control buffer (FCB) image to be used for the3211, 3203-5, 3262, 4248, 6262, or 3800 printers. The name of the FCB is a 1to 4 alphanumeric character string consisting of the last characters of thefollowing:v FCB2xxxx member for the channel attached line printers (3203, 3211, 3262,4245. 4248, 6262) or printers supported by System Network Architecture(SNA)v FCB3xxxx member for the 3800 printer.v FCB4xxx member for the 3262, 4248 or 6262 printerYour installation supplies a default for the SYSOUT class or for the printers.FLASH(overlay_name[,copies])specifies the name of a forms overlay, which can be used by the 3800 PrintingSubsystem. The overlay is “flashed” on a form or other printed information overeach page of output. The forms overlay_name must be 1 to 4 alphabetic,numeric, or special characters #, $, or @. Optionally, you can specify thenumber of copies on which the overlay is to be printed. The count can rangefrom 0 to 255. To flash no copies, specify a count of zero.FOLD(width) | TRUNCATE(width)specifies the length of the printed line if the input line is longer than the outputline.FOLDspecifies that width is the maximum length of the output line. Records thatare too long to be printed within that length are wrapped around ontosubsequent lines.TRUNCATEspecifies that width is the maximum length of the output line. Records thatare too long to be printed within that length are truncated to fit on one line.If the input data set contains carriage control characters, the data being foldedor truncated begins after the carriage control character. If the input data set hasa table reference character, or a carriage control character and table referencecharacter, the data being folded or truncated begins after the table referencecharacter.FORMS(forms_name)specifies the name of the form on which the output is to be printed. Specify 1 to4 alphabetic, numeric, or the special characters #, $, or @ for the forms name.HOLD | NOHOLD226 z/OS V1R9.0 TSO/E Command Reference