z/OS V1R9.0 TSO/E Command Reference

CHANGE►1TARGET(stream_name )intensityUPDATE( LINE )NEWESTPAGE►►VIEW(stream_name)►◄CHANGE.WINDOW command operandswindow_nameThe name of the window whose attributes are to be changed.ALARM(YES | NO)specifies whether the terminal’s audible alarm is to sound when the SessionManager places new information in the stream. If your terminal does not havean audible alarm, the Session Manager still accepts this operand. It has no wayof knowing whether your terminal has an alarm.HOLD(INPUT | seconds)specifies how long the window (when unlocked) is to be held in place before itis scrolled toward the bottom of the stream.INPUTspecifies that the window (when unlocked) be held in place until you supplyinput by pressing the Enter key or any program function (PF) key.secondsspecifies that the window (when unlocked) be held in place the specifiednumber of seconds before it is scrolled toward the bottom of the stream.seconds must be an integer from 0 to 999.During the time the window is held in place, the keyboard remains locked.The keyboard unlocks when the time expires or when the window displaysthe bottom of the stream.Note: The value specified on the CONTROL operand of theCHANGE.TERMINAL command overrides the value specified on thisoperand.OVERLAP(lines)specifies how many lines of the window’s old position are to be repeated whenthe window scrolls to a new position.lines must be an integer from 0 to 999. If you specify a value for lines that isgreater than or equal to the number of lines in the window, the SessionManager adjusts lines to be the number of lines in the window minus one.Thus, at least the bottom line of the window’s old position appears at the top ofthe window’s new position.PROTECT(YES | NO)specifies whether you can enter data in the window. You can enter data in anunprotected window only. If you try to enter data in a protected window, thekeyboard locks.TARGET(stream_name intensity)384 z/OS V1R9.0 TSO/E Command Reference