z/OS V1R9.0 TSO/E Command Reference

CHANGELASTspecifies that the timer is to be set to the last non-zero value entered forthe CONTROL keyword of this command.secondsspecifies that the keyboard is to be unlocked after the specified number ofseconds has elapsed. seconds must be an integer from 0 to 999.DEFAULT(window_name)The name of the window that you want to be the default window. This windowserves as the default window for other Session Manager commands when awindow name is entered with the command. The MAIN window is theIBM-supplied default window.CHANGE.TERMINAL command return codesTable 63. CHANGE.TERMINAL command return codes0 Processing successful.4 Syntax error in command.8 Window not found.CHANGE.WINDOWCHANGE.TERMINAL command examplesExample 1: Set the terminal so that the keyboard will be locked for no more than10 seconds.change.terminal control(10)Example 2: Set the terminal so that each time the keyboard unlocks the audiblealarm sounds.change.terminal alarm(yes)Example 3: Set the terminal so that the keyboard will be locked for no more than15 seconds and set the MAIN window as the default window.change.terminal control(15) default(main)commandUse the CHANGE.WINDOW command to change the attributes of an existingwindow on the display screen. Use the QUERY.TERMINAL or QUERY.WINDOWScommand to display the names and attributes of the currently defined windows.CHANGE.WINDOW command syntax►►CHANGE.WINDOWC.WC Wdefault_windowwindow_name ALARM( YES )NO►►HOLD( INPUT )secondsOVERLAP(lines) PROTECT( YES )NO►Chapter 2. Session Manager commands 383