z/OS V1R9.0 TSO/E Command Reference

CHANGEalarm to sound. If your terminal does not have an audible alarm, the SessionManager still accepts this operand. It has no way of knowing whether yourterminal has an alarm.CLEARerases all of the information in the stream. The stream itself is not erased.CHANGE.STREAM command return codesTable 62. CHANGE.STREAM command return codes0 Processing successful.4 Syntax error in command.8 Stream not found.CHANGE.TERMINALCHANGE.STREAM command examplesExample 1: Set the display terminal’s audible alarm to sound when informationgoes into the EXTRA1 stream.change.stream extra1 alarm(yes)Example 2: Erase all information in the TSOOUT stream.change.stream tsoout clearcommandUse the CHANGE.TERMINAL command to:v Specify whether the audible alarm is to sound when the keyboard unlocksv Indicate the maximum time the keyboard is to be locked while a command isexecutingv Change the default windowCHANGE.TERMINAL command syntax►►CHANGE.TERMINALC.TC TALARM( YES )NOCONTROL( LAST )seconds►►DEFAULT(window_name)►◄CHANGE.TERMINAL command operandsALARM(YES | NO)specifies whether the terminal’s alarm is to sound when the keyboard unlocks.When the keyboard is unlocked, you can enter input. If your terminal does nothave an audible alarm, the Session Manager still accepts this operand. It hasno way of knowing whether your terminal has an alarm.CONTROL(LAST | seconds)specifies the maximum time, in seconds, that the keyboard is to remain locked.The Session Manager sets a timer to unlock the terminal keyboard when thetime expires. Note, however, that when the keyboard is locked, you cannotenter commands, and attention interrupts will not be processed.382 z/OS V1R9.0 TSO/E Command Reference