z/OS V1R9.0 TSO/E Command Reference

SMFIND CommandSMFIND command return codesUpon completion, SMFIND returns the following:Table 46. SMFIND command return codes0 Return code 0 means one of the following:v The text_string was not found.v The specified stream was not found.v The command was incorrectly specified and SMFIND was unable toprompt for correct information.Other A positive integer specifying the line number of the found text_string.The maximum value is 16,777,216.SMFIND command examplesExample 1Find the next occurrence of ‘time’ in the TSOOUT stream.smfind ’time’ forwardExample 2Find the previous occurrence of ‘time’ in the TSOOUT stream.smfind ’time’SMPUTcommandUse the SMPUT command to place a text string in a stream. If you place the textstring in the TSOIN stream, it is interpreted as a TSO/E command. If you place thetext string in the SMIN stream, it is interpreted as a Session Manager command.SMPUT command syntax►►SMPUTSMP'text_string'SMINstream_name 1INTENSITY( intensity )►◄SMPUT command operandstext_stringspecifies the string of characters to be placed in the stream. The text_stringmust be enclosed in delimiters that are not in the text_string. It can be up to32768 characters in length, excluding the delimiters. If the text_string is beingsent to the SMIN stream, it can be up to 512 characters in length.stream_namespecifies the name of the stream where the text_string is to be placed.INTENSITY(intensity | 1)specifies the brightness at which the information in the stream is to bedisplayed. The valid values are:0 The information in the stream is not to be displayed. You can see the linethat the information occupies, but the information itself is invisible.1 The information is to be displayed at normal intensity.2 The information is to be highlighted.Chapter 1. TSO/E commands and subcommands 271