IBM WebSphere V5.0 Security - CGISecurity

2. Select Security -> User Registries -> LDAP and provide the followinginformation for the LDAP configuration:– Server User ID: enter the DN for your WebSphere server id. In ourexample, this is cn=wasadmin,o=tamral,c=us.– Server User Password field: enter the password for your server id.– Type: Netscape– Host: enter the DNS name of your iPlanet Directory Server. In ourexample, we entered tivoli9.svo.dfw.ibm.com.– Port: 636– Base Distinguished Name (DN): enter the directory suffix under whichyour WebSphere users are stored in your directory server. In our exampleo=tamral,c=us as our suffix.– Select the SSL Enabled checkbox.– SSL Configuration: iPlanetsslAfter finishing your entries, click OK.3. The global security settings will appear; select the Enable button for security.Select LDAP in the Active User Registry field, if you have not done so yet.Click OK.4. Once WebSphere validates your new configuration, you will need to save theconfiguration and restart your WebSphere server. If any errors are found, goback and check your entries before saving.Once you have restarted your WebSphere server, you will now be using SSL tocommunicate with your iPlanet Directory Server.Microsoft Active DirectoryIn this section, we will cover the steps required to configure WebSphereApplication Server V5 to use Microsoft Active Directory as its user registry. Touse Active Directory, you must have a Windows 2000 domain in yourenvironment. To configure your WebSphere server to use Active Directory as itsuser registry, follow these steps.1. To begin, start the Active Directory Administration console by selectingStart -> Programs -> Administrative Tools -> Active Directory Users andComputers. The following panel will display.Appendix B. LDAP configurations 485