IBM WebSphere V5.0 Security - CGISecurity

Note: If you have not set up an administration ID, then from a commandprompt, enter:C:\Program Files\IBMHTTPServer\htpasswd -cC:\IBMHTTPServer\conf\admin.passwd When prompted, enter your chosen password and verify it. Stop andrestart both Web server services to make the changes effective.2. At the IBM Administration Server Interface select Basic Settings -> ModuleSequence. Make sure that the Scope is set to . Click the Addbutton.3. From the Select module to add drop-down list select ibm_ldap(IBMModuleLDAP.dll) and click the Apply button.4. Click the Submit button. You should see the ibm_ldap module added in thePrioritized list of active server modules window, as in the figure below.Figure 4-1 Adding LDAP server module into HTTP server configuration5. Next, set the scope and type of the authentication. As mentioned before, alldocuments that are under htdocs\en_us will be secured. From the Web serveradministration console, select Access Permissions -> General Access.Click the Scope button and select .Chapter 4. Securing Web components 41