Turbo Basic

Color Display ModeTurbo Basic will use color mode with 80 X 25 characters no matter what mode isactive, switching back to the active mode when you exit.Black and White Display ModeTurbo Basic will use black and white mode with 80 X 25 characters no matterwhat mode is active, switching back to the active mode when you exit.Monochrome Display ModeTurbo Basic will use monochrome mode no matter what mode is active, switchingback to the active mode when you exit.Quitting the ProgramOnce you have finished making all desired changes, select Quit at the main menu.The message "Save changes to TB.EXE?" will appear at the bottom of the screen.If you press Y (for Yes), all of the changes you have made will be pennanentlyinstalled into Turbo Basic. (Of course, you can always run this program again if youwant to change them.) If you press N (for No), your changes will be ignored andyou will be returned to the operating system prompt.If you decide you want to restore the original Turbo Basic factory defaults, simplycopy TB.EXE from your master disk onto your work disk. You can also restorethe Editor commands by selecting the E option at the main menu, then press R (forRestore) and Esc.455