13.07.2015 Views

HP ProBook 4320s Notebook PC HP ProBook 4321s ... - Warranty Life

HP ProBook 4320s Notebook PC HP ProBook 4321s ... - Warranty Life

HP ProBook 4320s Notebook PC HP ProBook 4321s ... - Warranty Life

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Power connector boardDescriptionSpare part numberPower connector board with cable 599517–001Before removing the power connector board, follow these steps:1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turnthe computer on, and then shut it down through the operating system.2. Disconnect all external devices connected to the computer.3. Disconnect the power from the computer by first unplugging the power cord from the AC outletand then unplugging the AC adapter from the computer.4. Remove the battery (see Battery on page 51).5. Switch cover (see Switch cover on page 53)Remove the power connector board:1. Release the ZIF connector that connects the power connector board cable to the system board(1), and then disconnect the power connector board cable (2).2. Gently pull the power connector board away from the double-sided tape that secures the boardto the base enclosure.3. Remove the power connector board (3).Reverse this procedure to install the power connector board.Component replacement procedures 61

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!