HP ProBook 4320s Notebook PC HP ProBook 4321s ... - Warranty Life

4. If it is necessary to replace the display bezel, display enclosure, or display hinges, remove thefour Mylar screw covers (1) and the four T8 slotted-Torx M2.5×6.0 screws (2) that secure thedisplay bezel to the display assembly. The screw covers are available in the rubber kit, sparepart number 599564-001.5. Remove the bezel:a. Flex the top of the bezel from the inside edge until it disengages from the display backcover (1).b. Flex the bottom of the bezel from the inside edge until it disengages from the display backcover (2).c. Flex the inside edge of the left side and the right side of the bezel until it disengages fromthe display back cover (3).d. Remove the display bezel from the display back cover (4).86 Chapter 4 Removal and replacement procedures