Grundoram Manual (PDF 1.7MB) - TT Technologies Inc.

More documents

Recommendations

Info

F. Removal and Disassembly of the Control Stud ofthe Mini-Atlas GRUNDORAMFIG. 61: PARTS BREAKDOWN FOR THE MINI-ATLAS GRUNDORAM TOOL4 Machine body with knifehead and RK reception10 Piston15 Piston slide tapes (set)20 Piston seal25 Control tube for reverse runcontrol30 Control stud seal35 Casing end with cableconnection, without cable40 Elastic block45 Adjusting nut for reverse runcontrol50 Stop nut for reverse runcontrol55 Segment ring for reverserun control60 Support ring for reverse runcontrol65 Pin set (set=2 pieces)75-100 Connection air hose,complete, 0.3 m long75 Nozzle DN 25 with ring andspigot nut100 Sealing cap for quick-couplingDN 2515/20/30 Seals (complete set)4-100 Mini-Atlas 130 with slottedhead, 10 degrees receptionand 1' whip hose32 TT TECHNOLOGIES, INC.1. The complete control stud (Items 25, 30, 40, 45, 50, 60, 65 - Fig 61) is positionedin the casing end (Item 35 - Fig 61) and is secured with a segment ring(Item 55 - Fig 61) . The casing end (Item 35 - Fig 61) itself is screwed ontothe machine casing (Item 4 - Fig 61) and is secured by metal adhesive.2. Remove the connection air hose (see Fig. 62).3. Move the sleeve of the assembly tool over the thread of control tube(see Fig. 63).4. Screw the bolts of the assembly tool frame into the holes for the C-spanner at thecasing end (see Fig. 64).5. Position the tensioning bolt of the assembly tool onto the sleeve and press theelastic block (Item 40) until the segments of the segment ring (Item 55) can beremoved easily from the groove of the casing end (Item 35 - see also Fig. 65).6. Reduce the tension of the assembly tool and move it aside.
FIG. 62: REMOVE CONNECTIONAIR HOSEFIG. 63: INSTALL ASSEMBLY TOOLOVER THREAD OF CONTROL TUBEFIG. 64: ATTACH FRAMEASSEMBLY TOOLFIG. 65: REMOVE SEGMENT RINGFIG. 66: REMOVE SUPPORT RINGFIG. 67: REMOVE CONTROL STUD7. Remove support ring (Item 60 - see Fig. 66).8. Pull the control stud out of the casing end (Item 35 - see Fig. 67).9. For further control stud assembly and disassembly please contact TTTechnologies technical support personnel.TT TECHNOLOGIES, INC.33
Page 9 and 10: Technical SpecificationsA. Compress
Page 11 and 12: Safe Operating PracticesA. Work Are
Page 13 and 14: Base for rammerHeight adjustmentAir
Page 15 and 16: G. Tapered Locking Ram ConesThe pur
Page 17 and 18: I. Soil PortThe soil removal cone p
Page 19: FIG. 29: GRADE BORE CUT-AWAY CUTTIN
Page 22 and 23: 8.Spoil RemovalThe following method
Page 24 and 25: 7. The soil should then be blown ou
Page 26 and 27: A. Grundoram DisassemblyNOTE: The f
Page 28 and 29: B. Piston Removal1. Remove the pist
Page 30 and 31: 3. Fit the new control stud seal in
Page 34 and 35: G. Mini-Atlas Piston Removal1. Plac
Page 36 and 37: I. Mini-Atlas Control Stud Assembly
Page 38 and 39: L. Disassembly of PCG GRUNDORAMFIG.
Page 40 and 41: FIG. 88: PLACE CARRIER CONEON TOOLF
Page 42 and 43: 18. Use the jacking rod to remove t
Page 44 and 45: N. Control Stud Disassembly1. Place
Page 46 and 47: 7. Replace the black o-ring (see Fi
Page 48 and 49: 6. Once the segment ring is install
Page 50 and 51: Troubleshooting Guide10.Observation
Page 52 and 53: 12.APPENDIXAppendixA. Parts List fo
Page 54 and 55: C. Parts List for 130 Mini-AtlasIte
Page 59 and 60: H. Parts List for 260 GigantItem No
Page 61 and 62: J. Parts List for 350 KolossItem No
Page 63 and 64: L. Parts List for 600 TaurusItem No

Grundoram Manual (PDF 1.7MB) - TT Technologies Inc.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?